Trusscore offers a wide range of PVC-based framing, finishing, and specialty trims to help complete projects involving Trusscore Wall&CeilingBoard, Trusscore SlatWall, and RibCore.
Framing trims are designed to frame wall, window, and door perimeters, and to accommodate product transitions.
A perimeter trim for Trusscore Wall&CeilingBoard installations in any application.
Uses:
Top and bottom of walls
Window and door perimeters
Inside corners
Compatible with:
Wall&CeilingBoard
Product Numbers:
White: TCT12J10
Gray: GTCT12J10
A perimeter trim for Trusscore SlatWall and RibCore by Trusscore installations.
Uses:
Top and bottom of walls
SlatWall framing
Inside corners
Compatible with:
SlatWall
RibCore
Product Numbers:
White: RCT34J10
Gray: GRCT34J10
A two-piece trim designed to accommodate panel expansion or contraction and product transitions.
Uses:
Panel joints
Product transitions
Compatible with:
Wall&CeilingBoard
SlatWall
Product Numbers:
White: TLT58WTC10K
Gray: GTLT58HC10K
A clean, stylish option to complete inside corners and wall perimeters.
Uses:
Inside corners
Top and bottom of wet walls
Compatible with:
Wall&CeilingBoard
SlatWall
Product Numbers:
White: TCT12IC10
Gray: GTCT12IC10
For a smooth and seamless finish, these trims address outside corners, window and door perimeters, and top off SlatWall assemblies.
A trim designed to address 90° corners and perimeters. Available in small (1¼″ x 1¼″) and large (2″ x 2″) sizes.
Uses:
Outside corners
Window and door perimeters
Compatible with:
Wall&CeilingBoard
SlatWall
RibCore
Product Numbers
White: TCT12OC10 (1¼″), TCT12LOC10 (2″)
Gray: GTCT12OC10 (1¼″), GTCT12LOC10 (2″)
Designed to form smooth, bullnosed outside corners for applications requiring a softer touch.
Uses:
Outside corners
Compatible with:
Wall&CeilingBoard
Product Numbers:
White: TCT12IO10
Gray: GTCT12IO10
A finishing trim for the top of a Trusscore SlatWall panel assembly that prevents dust and dirt from accumulating behind panels.
Uses:
Top of SlatWall installations
Compatible with:
Wall&CeilingBoard
SlatWall
Product Numbers:
White: TLT58J08
Gray: GTLT58TC08
These specialty trims handle unique installation scenarios including bottom wall transitions, angled transitions, and soffits/bulkheads.
A transition trim for the transition between wall panels and a concrete floor.
Uses:
Bottom wall transitions
High moisture environments
Compatible with:
Wall&CeilingBoard
SlatWall
RibCore
Product Numbers:
White: TCT12BT10
Gray: GTCT12BT10
A transition trim for installations where two walls come together at an angle.
Uses:
Angled ceiling-to-ceiling transitions
Angled wall-to-ceiling transitions
Compatible with:
Wall&CeilingBoard
SlatWall
RibCore
Product Numbers:
White: TCT124510
Gray: GTCT124510
A trim for specialized Trusscore Wall&CeilingBoard applications including soffit or bulkheads, and for completing corners of RibCore installations. Available in ½" and ¾" widths.
Uses:
Soffit and bulkhead transitions
Inside and outside corners of RibCore installations
Compatible with:
Wall&CeilingBoard
SlatWall
RibCore
Product Numbers:
White: TCT12F10 (½"), RCT34IC10 (¾")
Gray: GTCT12F10 (½")
For Wall Perimeters: Use J Trim or Base Trim (bottom only)
For Inside Corners: Use Inside Corner Cove or J Trim
For Outside Corners: Use Outside Corner or Outside Corner Rounded
For Panel Joints and Transitions Between Products: Use H Channel Snap-In Kit
For SlatWall Top: Use SlatWall Top Cap
For Angled Transitions: Use 45° H Channel
For Soffits/Bulkheads: Use ½" F Trim
For RibCore Corners: Use ¾" F Trim
